VRX Walksnail + Avatar Pro Kit
Kod: C0CA-TZ009Opis szczegółowy produktu
Walksnail Avatar VRX with Avatar Pro Kit The Walksnail VRX is only 83g and comes with a 114x55x22mm size. It adopts 4 antenna designs, including 2 directional antennas, and the maximum transmission distance is 4km. The Walksnail VRX adopts industry-leading H.265 encoding technology, which can provide a minimum delay of 22ms and a maximum resolution of 1080p. Supports Betaflight full OSD display, Inav, Kiss full OSD display you can easily adjust the needed parameters by remote control. The HD picture quality takes you to experience the fun of flying. This item comes with Walksnail Avatar HD Pro Kit, which features an Avatar HD Pro Camera, Avatar V2 Antenna, and VTX with enhanced TVS protection and support for up to 6S. This VTX delivers unmatched stability and resistance to GPS interference with a wide input voltage range of 6V to 25.2V. This kit also has 1080P compatibility, high frame starlight, a 4KM range, and 32GB built-in storage. Specification: Walksnail Avatar VRX with Avatar Pro Kit Avatar HD VRX Model: Avatar HD VRX Communication Frequency: 5.725-5.850GHz TransmitterPower(EIRP): FCC:<30dBm; CE:<14dBm; SRRC:<20dBm; MIC:<25dBm I/O interface: HDMI, micro SD card slot, DC5.5x2.1mm HDMI Output: 1080p60fps, 720p100fps, 720p60fps Power Input: 7-21V(2S-5S) SDCard: Support 256G System: AvatarHD system Goggles Antenna Model: RedBird Polarization: LHCP Bandwidth: 5.6GHz-6.0GHZ Average Gain: 1.9dBi Radiation Efficiency: ≥97% VSWR: ≤1.3 Cross-Polar Rejection: -15to-30dB Connector: RP-SMA Dimension: H24.8mm*R15.3mm Weight: 4.2g Camera Model: Avatar HD Pro Camera Image Sensor: 1/1.8-Inch Sony Starvis Ⅱ Sensor Resolution: 1080P/60fps; 720P/120fps, 720P/60fps; 1080P/120fps compatibility; Ratio: 16/9; 4/3 Lens: 8Mp FOV: 160° Aperture: F1.6 Shutter: Rolling shutter Min.Illumination: 0.00001Lux Weight: 9.5g Dimensions: 19x19x24mm Coaxial Cable: 140mm VTX Model: Avatar V2 Module Communication Frequency: 5.725-5.850GHz Transmitter Power (EIRP): FCC:<30dBm; CE:<14dBm; SRRC:<20dBm; MIC:<25dBm 1/O Interface: JST1.0x4(Power in) JST0.8x6(USB) Mounting Holes: 25.5x25.5mm; 20x20mm Dimensions: 33.5x33.5x10.5mm Storage: 32G Recording: 1080p/720p Weight: 17.6g Operating Temperature: -20-40°C Channels: 8 Wide Power Input: 6V-25.2V Supported FC System: Betaflight; Inav; Fettec; ArduPilot; Kiss OSD: Canvas mode Latency: Average delay 22ms Antenna: 1(IPEX) Avatar V2 Antenna Polarization: LHCP Frequency range: 5600MHz-6000MHz Gain: 1.9dBi VSWR: ≤1.5 Input Impedance: 50Ω Interface: IPEX-1 Size: R15 X 45mm (without cable) Weight: 2g
Parametry dodatkowe
Kategoria: | Receiving modules for goggles |
---|---|
Frequency: | 5.8GHz |
Video Protocol: | AvatarHD |
Pozycja została wyprzedana… |
Bądź pierwszą osobą, która napisze opinię do tego produktu.
Dodaj komentarz