FPV Drone GEPRC Cinebot30 HD O3, 4S TBSNanoRX

Opis szczegółowy produktu

Cinebot30 HD O3 TBSNanoRX (4S)

Cinebot30 is a new generation Cinematic FPV drone. Camera parts are made of high-strength 7075 aircraft-grade aluminum alloy materials. The TPU shock-absorbing pad is designed on the bracket structure and can isolate the high-frequency vibration of the fuselage so that the camera can obtain jelly-free high-definition images during high-speed flight. An assembly scheme allows the O3 video transmission to be completely installed inside the fuselage without affecting the Type-C USB data cable connected to the Air Unit to read video data. O3 Air Unit system can transmit 1080P 60fps real-time images, and record up to 4K 60fps images with an anti-shake effect at the same time.
The upgraded video transmission system is compatible with the camera base fixed by 4-hole screws. The Cinebot30 can mount a full-sized GP camera with a battery life can reach 5 minutes and 30 seconds. Recommends flying with Naked camera GP10, with a battery life of up to 10 minutes and 30 seconds.
Adopts high-strength one-piece injection-molded propeller guard and high-toughness and impact-resistant PC material for injection molding. A ring-shaped Cob light strip is embedded in the propeller guard, and the light effect is carefully tuned. High-strength grain-cut carbon fiber sheet, the overall strength of the fuselage is upgraded.
Cinebot30 is equipped with a powerful 1804 motor with an optimized motor magnetic circuit and surging torque for ultra-low altitude shooting. HQ prop T76mm*3 propeller has the lowest noise effect in its class. Using GEP-F722-45A AIO v2 flight controller, higher performance redundancy, and easy handling of unexpected situations.

Specifications
Model: Cinebot30 HD O3 Quadcopter
Brand: GEPRC
Frame: GEP-CT30 O3
Wheelbase: 127mm
Isolation Plate: 2mm
Main plate: 3mm
Bottom plate: 1.5mm
FC: GEP-F722-45A AIO V2
MCU: STM32F722RET6
IMU: ICM-42688-P
VTX: DJI O3 Air Unit
Video resolution: 4K@50/60fps, 2.7K@50/60/100/120fps, 1080p@50/60/100/120fps
Camera: DJI O3
Propeller: HQ prop T76mm
Antenna: DJI O3 Antenna
Charge connector: XT60H-M
Motor: SPEEDX2 1804-2450KV (6S Version) / SPEEDX2 1804-3450KV (4S Version)
Weight: Nebula Pro version 222.5g / Avatar version 221g / Analog version 209.2g / Link Wasp version 222.5g / O3 version 234.7g (excluding battery, the above are TBS Nano RX version)
Receiver: PNP, Frsky R-XSR, TBS Nano RX, ELRS 2.4G
Recommended Battery: LiPo 4S 1100mAh-1300mAh (4S Version) / LiPo 6S 850mAh-1100mAh(6S Version)