FC iFlight BLITZ F7 Pro V1.1 35x35

Opis szczegółowy produktu

BLITZ F7 Pro V1.1 Flight Controller 35x35

Features:
- Improved circuit design, better components, and lower electrical noise!
- DJI HD VTX Connector (Plug-and-Play / No soldering required)
- FC indicator LEDs for visual debugging
- 512MB BlackBox
- With LC filter

Specifications: 
Mount pattern: 35*35mm/ 4mm PCB hole diameter
Smartaudio / IRC Tramp VTX protocol supported
Firmware target: IFLIGHT_BLITZ_F7_PRO
Input Voltage: 14.8V-34V (4S-8S LIPO)
Motor outputs: 4x (SH1.25 connector)
Flash: 512MB (Blackbox flash)
I2C serial: SDA / SLA pads
Dimensions: 41*41.5mm
Barometer: DPS310
OSD Chip: AT7456E
LED controller: Yes
MCU: STM32 F722
Weight: 17g (±2)
Beeper pad: Yes
Gyro: BMI270
UARTS: 4

Wiring Suggestion:
UART1 for VTX HD/Analog
UART2 for  Receiver
UART4 for GPS
UART5 for ESC Telemetry
8×Dshot/PWM outputs 
1×I2C  for GPS Mag

Tips
1. F722 MCU has an inner inverter.
2. SBUS, CRSF, ELRS, IBUS, DSM ETC... can be connected to any unused UART_RX, we suggest you connect to Uart_RX2.
3. Frsky SmartPort, Tramp & Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1.
4. F.port can be connected to any unused UART_TX, we suggest you connect to Uart_TX2.

Wiring diagram
https://drive.google.com/drive/folders/17Uf67I6ER_z-otviR0I7tSqO31W7S553