-1.png)
.jpeg)
Antenna GEPRC Triple Feed Patch Array RP SMA
Code: GP100137Product detailed description
Triple Feed Patch Array The Triple Feed Patch Array antenna is a directional circularly polarized antenna based on the original Triple Feed Patch antenna. It uses an array of seven coupled patches, resulting in significantly higher gain. Since the beamwidth is rather narrow, this antenna is not recommended for general FPV, but for long-range flight it performs very well. Feature 1. Good radiation efficiency. Most FR4-based patches are very efficient because FR4 is very lossy at 5.8 GHz. Also, most array antennas have higher losses in the feed network. The design uses coupling patches to keep the feed network simple and reduce these losses. 2. Very good axial ratio, not only directly perpendicular to the patch but also eccentric. 3. High gain, but not higher than theoretical gain for an array with 7 elements. This is because maximizing gain results in high side lobes and poor axial ratio. 4. Very low side lobes, almost all the energy is concentrated on the main lobe. This increases the width of the main lobe but adds some gain. Specifications: Center frequency: 5.8 GHz Bandwidth: 660 MHz (5.47 – 6.13 GHz) Matching: S11 < -20 dB, VSWR < 1.22 (at center frequency) Axial ratio: < 1.1 Antenna gain: 14.4dBi Connector: RP-SMA/SMA Half power beam width: 30° (horizontal and vertical) Radiation efficiency: 75% Diameter of large disk: 150mm
Be the first who will post an article to this item!
Add a comment
GEPRC is a team of over 100 specialists who are committed to providing users with high-quality FPV drones. There are drones for fun, freestyle, racing, and commercial purposes. Through years of experience accumulation, GEPRC has developed a variety of products, and the company is committed to creating high-quality FPV drones and parts (electronics, motors, frames, etc.) to help more people get into the FPV hobby.
