FPV Whoop RTF GEPRC TinyGO 4K

Product detailed description

TinyGO 4K FPV Whoop RTF (Mode2/Left Throttle)

TinyGO is RTF Kit that is suitable for any novice from scratch and Indoor flight. TinyGO currently has two versions: the Indoor version and the 4K professional version. 4K can record 4K 60fps video.

The Kit contains a high-definition 800x480px FPV Goggle and the latest TinyRadio GR8 Remote Controller. It supports 8 channels and is specially designed for indoors and novices. The remote control has a good feeling of control and It is lightweight and easy to carry. The good point is that you don’t need to carry heavy equipment. With our customized GEPRC Fly Bag, it’s very convenient to go to the field, travel, and Indoor flight.

TinyGO can use its own charger to charge. The charger uses the Type-C interface. You can use the movable power bank to charge as well. Using conveniently and quickly.

TinyGO can be flight more than 6 minutes (Depending on flight habits). Its stable electronic equipment and extremely strong and tough frame material make the FPV very stable and durable for crashes. There is an EVA protection foam around the frame, More elastic and hard to damage and deformed.

Specifications of TinyGo 4K
Camera: Loris 4K
Image sensor: 1/2.7″ CMOS sensor
Horizontal: 800TVL
TV system: NTSC/PAL changeable
Video Resolution: 1080P@60fps / 1080P@90fps / 2.7K/60FPS 4K/30FPS 4K/60FPS [REAL 3.5K/60FPS)
Power Input: DC 4.5-20V
FPV FOV: 165°
Recording FOV: 170°
Mini Illumination: 0.01lux
Lens: 1.8mm Lens
Working Current: 380mA@5V/160mA@12V (low consumption)
OSD Menu: Yes (Support Voltage Display)
Video Files: MOV
Audio: Support
Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100
Video Output: CVBS

Configuration
Name: TinyGO
Brand: GEPRC
Frame: GEP-TG16
Motor to Motor: 79mm
FC: TAKER F411 8Bit 12A
MCU: STM32F411
IMU: 42688-P
Blackbox: 16Mb
OSD: BetaFlight OSD w/ AT7456E chip
ESC: 8Bit 12A
VTX: RAD Whoop 5.8G 25~400mw VTX
Camera: Runcam Nano2/Caddx Loris 4K 60fps
Propeller: GEMFAN 1636*4 (4 pairs)
Motors: GR1102 10000Kv
Receiver: Integrated ELRS SPI receiver
TinyGO 4K Weight: 54.8 Grams

Remote Controller:
TinyRadio ELRS 2.4G Remote Controller
Radio Frequency: 2.4GHz
Radio Frequency: 2.4GHz
Range: 1000+ meter
Channel: 8
Transmit Power: <500mW
Antenna interface: SMA
Low Voltage alarm: <6.6v
Batteries: 2 x 18650 Batteries (not included)

FPV Goggle:
Resolution: 800*480px
Size of Screen: 4.3 inch
Whole Size: 155mmx144mmx113mm
In-built batteries: 3.7v/2000mAh
Working Hours: 2.5 Hours
Weight: 314.6 Grams

FPV Batteries:
Batteries Capacity: 530mAh
Voltage: 4.35v 1S1P
Discharge rate: 90C
Size:（61mmx16.7mmx7mm）
Weight: 12.7 Grams
Interface: PH2.0

Charger:
Input power:5v（USB & Type C）
Full charged Voltage:4.35v
Output current: 500mAh
Charging:It can charge 2 PCS 1s HV lipo 4.35v HP2.0/GNB27 plug batteries at the same time