Stack iFlight BLITZ H7 Pro Combo Set (E80 single ESC *4)

Product detailed description

Stack iFlight BLITZ H7 Pro Combo Set (E80 single ESC *4)

Introducing the BLITZ H7 Pro Flight Controller—a powerhouse with a dual-sided shielding design that not only protects against interference but also safeguards the controller from debris, ensuring seamless operation. The detachable shielding allows for easy TF card replacement. Upgraded with a robust STM32H743 MCU, it supports input voltages up to 12S and is compatible with ArduPilot firmware, offering customers endless possibilities. Upgrade to the BLITZ H7 Pro for unparalleled performance.

FC Features:

• Features 35x35mm mounting holes, providing a larger size for optimized flight controller PCB wiring.
• GH1.25 connector design enhances terminal connection reliability and ensures easy assembly.
• Utilizes an SD card for the flight controller's black box, offering increased capacity to record more flight data.
• Dual-sided shielding design offers interference protection and safeguards the flight controller from foreign object malfunctions.
• Removable expansion soldering pad board enables advanced users to easily connect additional peripherals.
• Incorporates a high-voltage DC-DC buck converter with a chip voltage endurance of up to 100V, delivering stable and reliable voltage for the flight controller and video transmission.
• Supports Betaflight and Ardupilot firmware.

FC Specifications:

• Product Name: BLITZ H7 Pro Flight Controller
• MCU: STM32H743
• Gyro: ICM42688
• Baro: DPS310
• OSD: AT7456E
• Input Voltage: 14.8V-50.4V (4S-12S LIPO)
• Blackbox: SD Card
• UARTS: 7
• Smartaudio / IRC Tramp VTX protocol supported
• LED Controller: Yes
• Beeper Pad: Yes
• Mounting Pattern: 35x35mm/φ4
• Dimensions: 42x42x11.3mm
• Weight: 20g
• BEC: 5V 3A, 12V 2.5A
• BF Firmware Target: IFLIGHT_BLITZ_H7_PRO (BF4.4.2)
• Ardupilot Firmware: BlitzH743Pro

FC Wiring Suggestion:

• UART1: for VTX HD/Analog
• UART2: for Receiver
• UART4: for GPS
• UART5: for ESC Telemetry
• 8×Dshot/PWM outputs
• 2×I2C for GPS Mag

ESC Description: The BLITZ E80 BLHeli Dshot600 Single ESC was designed to deliver smooth power to your motors with great stability and durability. Equipped with a 32-bit 48MHz G071 MCU and 11 pieces of TDK MLCC, totaling 240UF Low ESR capacitors, this ESC ensures faster response and a smoother flying experience.

ESC Highlights:

• 2-8S input (max 8S)
• 80A 8-layer 4OZ copper PCB for better operating load capacity
• 11 pieces of TDK MLCC totaling 420UF Low ESR capacitors for lower ripple and more stability
• Top-grade NTMFS5C430NL MOSFET, offering stability and reliability
• 1 × 3528 LED for power-on display
• Rational layout, large soldering pad, countersinks, and semicircle orifices enable each layer to be energized after power-on

ESC Specifications:

• Input Voltage: 2-8S (max 8S)
• Max Continuous Current: 80A
• PCB: 8 layers, 4OZ copper
• Capacitors: 11 pieces TDK MLCC, total 420UF Low ESR
• MOSFET: NTMFS5C430NL
• LED: 1 × 3528 for power-on display
• Layout: Rational, with large soldering pads, countersinks, and semicircle orifices for reliable connection

ESC Support:

• Current Sensor
• Telemetry output
• Motor Timing
• Brake on Stop

Packing List:

• 1 x BLITZ H7 Pro Flight Controller
• 4 x BLITZ E80 Single ESC with CNC Alum Cover (Combo2)
• 4 x 50V 1000UF Capacitor (Combo2)
• 4 x Power Cables & ESC Signal Wires (Combo2)
• 1 x Screws Pack
• 1 x USB Adapter Board