FC SpeedyBee F7 Mini

Product detailed description

SpeedyBee F7 Mini Flight Controller

The SpeedyBee F7 Mini FC has come to change the way you deal with electronics. Flash, update, configure, all without having to plug into any computer. With the SpeedyBee app, you can change almost any parameter wirelessly.

Specifications:
Product Name: SpeedyBee F7 Mini
MCU: STM32F722
IMU (Gyro): BMI270 for current batches; MPU6000 for old batches before May 2022.
USB Port Type: Type-C
Barometer: N/A
OSD Chip: AT7456E chip
BLE Bluetooth: Supported. Used for Flight Controller configuration (MSP should be enabled with Baud rate 115200 on UART 6)
WIFI: Not supported
Flash FC Firmware Wirelessly: Not supported. Please update the firmware for this FC on the PC
Download/Analyze Blackbox: Not supported. Please download and analyze Blackbox data on the PC
DJI Air Unit Soldering Pads: Supported
Flash (for BlackBox): 8MB
Current Sensor: Supported, Scale=250 Offset=-500
BetaFlight Camera Control Pad: Yes(CC pad)
Power Input: 3S - 6S Lipo
5V Output: 6 groups of 5V output, five +5V pads and 1 BZ+ pad( used for Buzzer). The total current load is 2.5A.
9V Output: 2 groups of 9V output, the total current load is 2A.
3.3V Output: Supported. Up to 500mA current load.
ESC Signal Pads: M1 - M4
UART: Full UART x 3(UART1, UART2, UART3)
ESC Telemetry UART: R4(UART4)
I2C: Not supported
LED Pad: Used for WS2812 LED
Buzzer: BZ+ and BZ- pad used for 5V Buzzer
BOOT Button: Used to enter DFU mode
RSSI Input: Not supported
SmartPort: Use any TX pad of UART for the SmartPort feature.
Supported Flight Controller Firmware: BetaFlight(Default)
Firmware Target Name: SPEEDYBEEF7MINIV2 for current batches(Gyro: BMI270); SPEEDYBEEF7MINI for old batches(Gyro: MPU6000) before May 2022.
Mounting: 20 x 20mm, 3.5mm hole diameter
Dimension: 30 x 30 x 7.5mm
Weight: 5.7g