FPV Drone HGLRC Draknight 2-inch Entry level RTF Set

Code: 4358
Not rated
Brand: HGLRC
€334,99 €276,85 excl. VAT
In stock (3 pcs)
Delivery to:
25/12/2024
Delivery offer

Detailed information

Product detailed description

HGLRC Draknight 2-inch Entry-level RTF Set

The HGLRC Draknight 2-inch Entry-level RTF Set is perfect for beginners diving into FPV drone flying. The set includes a compact and durable 2-inch quadcopter with a high-definition FPV camera and transmitter, ready-to-use radio transmitter, and comfortable FPV goggles, making it easy for newcomers to start flying immediately. The set supports multiple simulators, like FPV Logic, DCL, Liftoff, DRL, TRYP, etc. With stable flight and intuitive controls, it offers an exciting entry point into the world of FPV drone racing and freestyle flying.

Specifications:

Draknight drone parameters
Frame: Draknight frame 
Flight controller: SPECTER12 ES2-4S AIO 
MCU: STM32F411
GYRO: ICM42688P
Built-in receiver: UART ExpressLRS 2.4G
Built-in video transmission: 0-25-100-400mW(adjustable) 
Continuous current:12A 
Peak current: 15A(5s)
ESC protocol: Dshot150/300/600
ESC firmware:/(Bluejay) 
Flight control firmware: HGLRCF411SX1280_15A 
Flight control input voltage: 2S-4S (Lipo)
Mounting hole:25.5X25.5mm.M2 
Motor: SPECTER 1003 10000kv motor 
Propeller: Gemfan2023 propeller 
Weight: 44.3g

Remote control parameters:
Built-in ELRS: ELRS 2.4GHZ
Built-in ELRS refresh rate: 250HZ
Remote control sensor type: potentiometer sensor 
Antenna: built-in ipex1 generation copper tube antenna
Working voltage: 6-8.4v DC
Remote control distance: greater than 500m 
Output interface: TX module NANO bin (crsf protocol), TYPE-C (only charging and firmware flashing), 3.5MM analog trainer port 
Battery: 18650 flat head battery x2 (need to be installed by yourself)
Charging: TYPE-C charging current 1.2A The charging time is about 3-4 hours Remote control channel: 8 channels 
Bluetooth: Bluetooth 4.2 
ELRS firmware upgrade method: WIFI or TYPE-C wire brush
ELRS firmware version: ELRS 3.0
ELRS firmware name: DIY devices 2.4 GHZ DIY ESP32 + E28 2.4GHz TX
Weight: 195g (excluding battery)

Dongle parameters:
Built-in ELRS Maximum supported frequency: 250hz
Receiving distance: more than 200m 
Binding method: Quickly power on and off three times to enter binding mode 
Interface: USB TYPE-C+USB TYPE-A double plug
Working voltage: 5V
ELRS firmware upgrade method: WIFI or USB plug
ELRS firmware version: ELRS 3.0 ELRS 
Firmware Name: HGLRC 2.4 GHZ HGLRC Hermes 2.4GHZ RX
External receiver support protocol: only supports CRSF protocol Weight: 9.5g
Size: 74mmx21mmx12.5mm

Package Includes:

1x HGLRC Draknight 2-inch Entry-level RTF Set

Additional parameters

Category: Racing Series
Drone Power: 2-4S
Drone Setup: RTF
Drone Type: Racing
Receiver Protocol: ELRS 2.4G
Size: 2 inch
Video System: Analog
Weight: 44.3g

Be the first who will post an article to this item!

Do not fill out this field:
Прямоугольные кнопки