FPV Camera Walksnail Avatar Mini 1S Lite Kit

Product detailed description

Avatar Mini 1S Lite Kit 
   
Avatar HD mini 1S lite kit comes with a smaller, lighter, and stronger version VTX board. The Avatar HD lite camera has a 2.1mm lens and 170°FOV, it can bring you a clearer, more realistic image quality. This kit has 32G built-in storage and Canvas mode. It supports 1080P/60fps, 720P/100fps high definition FPV image quality with an average of 22ms ultra-low latency. The Avatar mini 1S lite kit is suitable for more types of drones, with 3.1-13V voltage input and 500mw power output.

Specification:
 
Camera 
Model: Avatar lite camera
Image Sensor: 1/2.7”1nch
Resolution: 1080P/60fps, 720P/120fps, 720P/60fps
Ratio: 16/9  4/3
Lens: 2.1mm
FOV: 170°
Aperture: F2.0
Shutter Rolling: Rolling shutter
Min.Illumination: 0.001Lux
Weight: 1.8g
Dimensions: 14x14x16mm

VTX 
Model: Avatar mini 1s module
Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP): FCC:<25.5dBm; CE:<14dBm;
SRRC:<20dBm; MIC:<25dBm
I/O Interface: JST1.0x6(Power in) JST0.8x4(USB)
Mounting Holes: 25.5x25.5mm
Dimensions: 30x30x6.5mm
Storage: 32G
Recording: 1080p/720p
Weight: 6.8g
Operating Temperature: -20 - +40°C
Channels: 8
Wide Power Input: 3.1-13V(V3)
Supported FC System: Betaflight; Inav; Fettec; Kiss; ArduPliot
OSD: Canvas mode
Bitrate: 25mbps 50mbps
Latency: Average delay 22ms
Antenna: IPEX

1s lite antenna 
Polarization:  Linear
Frequency range: 5600-5900MHz
Gain: 1.6 dbi
VSWR: ≤1.5
Input Impedance: 50Ω
Interface: IPEX-1
Size: R 5mm,L 70mm
Weight: 0.5g

Package includes:
1 x Avatar Mini 1S lite KIT
1 x 4 Pin USB Cable
1 x 4 Pin Power Cable
4 x 1.4×8mm Screws  
2 x 1.4×10mm Screws 
4 x M2 Anti-vibration Rubber Dampers x6mm